INERO patented Flood Barriers are designed to withstand water levels up to 1.7m (170 cm/ 67 inches/ 5.57 ft). INERO stop and withstand standing and rushing water and can be assembled directly in the water as long as the water level is not more than 30cm (1ft).

​

• Step 1:Connect the barrier panels with the quick connector from left to right.

• Step 2: Mount the support leg and support beams. Two galvanized (M16) screws and pre-mounted nuts fit into the keyhole slots. Adjust by hand or with a tool.

• Step3: Roll the polyethylene membrane ober the barrier framework and attach the clips on top of the edge. Anchor the bottom with sand, gravel or a heavy chain.